Extraction Labs

Extraction Labs

Cannabis Pro Systems Modular Extraction Labs can be configured to accommodate any extraction layout you can imagine! Each unit has a fully finished gloss white interior. Designed with a ‘Safety First’ approach. All Modular Extraction Labs come pre-wired with code compliant lighting and electrical outlets, ready to receive your extraction equipment of choice. Whether you are using CO2, Butane (BHO) or any other approved solvent extraction method, our units provide the safety and security you need.

Cannabis Pro Systems C1D1 Hydrocarbon Extraction Labs (Butane, Propane, BHO, etc)

Compliance

• All Cannabis Pro Systems Hydrocarbon Extraction Labs meet or exceed all Class 1 Division 1 requirements:
• Occupational Safety and Health Administration (OSHA)
• National Fire Protection Association (NFPA) 33, 58 and 70
• National Electrical Code (NEC)
• State and Local Code Requirements

Construction

• All Cannabis Pro Systems Extraction Labs are built from durable high-cube ISO shipping containers
• Entry doors are manufactured out of high strength steel with panic-bar and an optional observation window.
• Flooring will be high-quality Armstrong Linoleum. Made for constant use and heavy foot traffic, this long-lasting finish is easy to clean, which will help reduce the possibility of contamination or mold.
• Internal walls finished with a bright white, high gloss, anti-microbial paint to deter mold and rust for a more hygienic environment.
• Optional Clean Room, FRP, gloss white, R13 insulation wall panels are available upon request.
• All electrical components, lighting, and controls are designed to meet C1D1 requirements based on current national and local jurisdiction codes, subject to change.

Operation and Detection

• Air Circulation System: Constant air circulation is configured for negative air flow.
• HVAC: Where requested, both heating and air conditioning can be added to any unit.
• Sensor System: Hydrocarbon sensors within the lab constantly monitor the lab environment for hazardous conditions.
• Air Evacuation: During an emergency hydrocarbon event, Cannabis Pro’s proprietary ‘Evac-Air’ system will replace the entire airspace with fresh outside air in seconds.
• Dry Fire Suppression: A full dry fire suppression system will monitor and suppress any fire events.

Cannabis Pro Systems CO2 Extraction Labs

Compliance

• All Cannabis Pro Systems CO2 Labs meet or exceed all code requirements:
• Occupational Safety and Health Administration (OSHA)
• National Fire Protection Association (NFPA) 33, 58 and 70
• National Electrical Code (NEC)
• State and Local Code Requirements

Construction

• All Cannabis Pro Systems CO2 Extraction Labs are built from durable high-cube ISO shipping containers
• Entry doors are manufactured out of high strength steel with panic-bar and an optional observation window.
• Flooring will be high-quality Armstrong Linoleum. Made for constant use and heavy foot traffic, this long-lasting finish is easy to clean, which will help reduce the possibility of contamination or mold.
• Internal walls finished with a bright white high gloss anti-microbial paint to deter mold and rust for a more hygienic environment.
• Optional Clean Room, FRP, gloss white, R13 insulation wall panels are available upon request.
• All electrical components, lighting, and controls are designed to meet code requirements based on current national and local jurisdiction, subject to change.

Operation and Detection

• Air Circulation System: Constant air circulation is configured for negative air flow.
• HVAC: Where requested, both heating and air conditioning can be added to any unit.
• Sensor System: CO2 sensors within the lab constantly monitor the lab environment for hazardous conditions.
• Air Evacuation: During an emergency CO2 event, Cannabis Pro’s proprietary ‘Evac-Air’® system will replace the entire airspace with fresh outside air in seconds.
• Dry Fire Suppression: When required; a full dry fire suppression system can monitor and suppress any fire events.

Cannabis Pro Systems Dual Zone Labs

– Hydrocarbon C1D1 Zone + Non-Classified Zone
– CO2 Zone + Non-Classified Zone

Compliance

• All Cannabis Pro Systems Dual Zone Labs meet C1D1 or CO2 code requirements:
• Occupational Safety and Health Administration (OSHA)
• National Fire Protection Association (NFPA) 33, 58 and 70
• National Electrical Code (NEC)
• State and Local Code Requirements

Construction

• All Cannabis Pro Systems Extraction Labs are built from durable high-cube ISO shipping containers
• Entry doors are manufactured out of high strength steel with panic-bar and an optional observation window.
• Flooring will be high-quality Armstrong Linoleum. Made for constant use and heavy foot traffic, this long-lasting finish is easy to clean, which will help reduce the possibility of contamination or mold.
• Internal walls finished with a bright white, high gloss, anti-microbial paint to deter mold and rust for a more hygienic environment.
• Optional Clean Room FRP, gloss white, R13 insulation wall panels are available when requested.
• All electrical components, lighting, and controls are designed to meet C1D1 or CO2 requirements based on current national and local jurisdiction codes, subject to change.

Operation and Detection

• Air Circulation System: Constant negative air circulation is based on Lab Zone requirements.
• HVAC: Where requested, both heating and air conditioning can be added to any unit.
• Sensor System: Hydrocarbon or CO2 sensors within the lab constantly monitor the lab environment for hazardous conditions.
• Air Evacuation: During an emergency Hydrocarbon or CO2 event, Cannabis Pro’s proprietary ‘Evac-Air’® system will replace the entire airspace with fresh outside air in seconds.
• Dry Fire Suppression: When required; a full dry fire suppression system can monitor and suppress any fire events.
• Non-Classified Zone: Allows for operation of non-classified equipment like ovens and roto vapes.

Modular Custom Configurations

Since our solutions are based on standard shipping containers, we can accommodate virtually any configuration that you can dream up. Whether it’s just a single container, or a solution requiring many containers, we have what you’re looking for.

  • Class 1 Div 2 Extraction Lab
  • Extraction Lab
  • Extraction Lab
  • Extraction Lab
  • Extraction Lab
  • Extraction Lab
The Extraction Lab models listed below are “Standard” models. These models can be modified with options, upgrades and 3rd party components, as your specifications require.
Standard Extraction Lab Models
Model Number Length Interior Features
EL-10-UI 10 Feet Unfinished 2 Vapor tight T8 overhead Lighting fixtures
EL-20-UI 20 Feet Unfinished 4 Vapor tight T8 overhead Lighting fixtures
EL-30-UI 30 Feet Unfinished 5 Vapor tight T8 overhead Lighting fixtures
EL-40-UI 40 Feet Unfinished 7 Vapor tight T8 overhead Lighting fixtures
EL-10-FI 10 Feet Finished 2 Vapor tight T8 overhead Lighting fixtures
EL-20-FI 20 Feet Finished 4 Vapor tight T8 overhead Lighting fixtures
EL-30-FI 30 Feet Finished 5 Vapor tight T8 overhead Lighting fixtures
EL-40-FI 40 Feet Finished 7 Vapor tight T8 overhead Lighting fixtures
Modular Custom Configurations

Since our solutions are based on standard shipping containers, we can accommodate virtually any configuration that you can dream up. Whether it’s just a single container, or a solution requiring many containers, we have what you’re looking for.

Custom Configurations

Available sizes

Your unique solution can be based on any standard container size, 10 feet, 20 feet, 30 feet (custom size), 40 feet, or anywhere in between. You have the freedom to design a layout that fits your facility perfectly. Unlimited choices give you unlimited possibilities!

Available Sizes

Cannabis Pro Systems is dedicated to assisting new and expanding cannabis enterprises with meeting their production facility set up or expansion requirements. From grow to extraction, we manufacture standard and custom units engineered to save you time and money. Our units are built quickly and arrive at your facility ready to use. These modular and mobile units are easy to use and maintain, giving you maximum flexibility and control of your production. We keep your startup and expansion costs low while providing real value that actually makes a difference where it matters most.

Extraction Lab Options & Upgrades

“What do I need?” GREAT question! As states legalize cannabis one by one, each state will eventually have it’s own rules and regulations to follow. Worker safety and preference will be the key factors in how you configure your extraction lab. We add or modify components to compliment your preferred layout and options, and ensure your environmental configuration conforms with the code requirements of your specific regulatory body.
Safety First!

Environmental Sensors

Environmental Sensors

Regardless of the process you use, gas leaks are a serious issue. We have some serious solutions.

Fire Suppression

Fire Suppression

Fire is a concern for every business. We will make sure you’re never concerned because you’re prepared!

Security Windows

Security Windows

Ensure that your significant investment is always safe and secure. Piece of mind is worth the effort!

Security Gates

Security Gates

Secure critical areas, inventory, and products. Keep your controlled materials under control.

Custom Utility Trailers

Custom Utility Trailers

If you need your lab mobile and properly leveled, this is the perfect solution. Custom built to fit your units.

Air Conditioning & Heating

A/C & Heating

Stay comfortable at any time of the year. Winter, spring, summer, or fall, a MUST HAVE workplace feature.